Skip to content

Use msi afterburner

The keyboard and mouse may be the preferred input devices for PC games, but there are other input devices that are more suitable for console controllers. In any case, certain types, such as racing and fighting, work better with console controllers (unless you are willing to spend money on special settings, such as fighting sticks).

No matter why you want to use a PS3 controller, we can meet your needs.

In our guide to using a PS3 controller on a PC, there are basically two ways to do this (it doesn’t matter which PS3 model you have):

Note: Find out about how to connect a PS4 controller to a PC The description, then check this out.

Please also note: You may have heard of MotioninJoy in the past, but due to advertising (and possible viruses), it is no longer a good choice. More on that below.

What do you need:

First of all, make sure your PS3 is disconnected, because if you press the PS button, it will connect and turn on the PS3, so it does not allow you to connect it to your computer.

Then connect your PS3 controller to your PC via a miniUSB cable to install the initial PS3 controller driver set. After the initial installation is complete, download the following (these are necessary for SCP software to run):

Note: Most of you may have installed these, but they are worth checking to avoid long-term problems, especially if you are not in the first place Determine if you have these. The installation process will tell you if they are already installed, so you can choose not to participate in the installation process if necessary.

1

1

Visit the PCSX2 thread here and download the latest and updated version of the SCP DS driver. The folder will be in 7zip format, so if you don't have Windows software like WinRAR, be sure to download and install the

2

archive utility to extract the latest downloaded version and latest updated zipped folder.

3

Open the last unzipped update folder, navigate to ScpServerin and copy all the files it contains.

4

Open the folder of the latest unzipped version, navigate to ScpServerin and paste all the files you just copied. If a warning message appears, replace the files in the destination folder.

5

Now that we have set it up, you can continue deleting the original zipped folder: the latest update and the latest version folder. You can also delete the unzipped version from the latest update folder. From here on, we will use the latest version of the folder.

6

Open ScpServer in the latest version folder and copy the bin folder.

7

Go to C: Program Files, create a folder and name it Scarlet.Crush Productions (because they made the software anyway) and paste the bin folder into it.

8

Click Continue when prompted for administrator privileges.

9

Open the pasted bin folder, right click on the ScpDriver application and run it as administrator.

10

Before clicking the install button, be sure to check the boxes next to the Bluetooth driver (for Bluetooth configuration) and the configuration service. If you want to run the PS3 controller on a PC with Windows 7 or earlier, select the Force Install button. This will install the pre-installed drivers in Windows 8 and 10.

11 4444 After the installation is complete, click Exit and open the ScpMonitor application. Your controller should be detected by default because you connected it from the beginning. As long as the game is compatible with the console controller, you can also use your PS3 controller in Steam games. This may require you to play the game in "big screen mode" on Steam.

If the controller is not detected, unplug and reinsert the controller. If it shows "Loading" instead of "Reserved", then the controller is detected and is working. If your driver is still not detected, restart your PC. If the host address is displayed as Disconnected in the SCP DS3 monitoring software according to the above steps, it means that Bluetooth is not supported.

2

To wirelessly connect your PS3 controller to a PC (Windows 7 or Windows 10) via Bluetooth, you need a Bluetooth adapter. You also need to enable Bluetooth:

1

Open the Zadig folder in the C: Program Files Scarlet.Crush Productions folder and open the Zadig application

2

Click Device> Load Preset Device and open or double-click Bluetooth.cfg.

3

Click Options> List All Devices and then find your USB key in the drop-down menu. Open the settings for your Bluetooth device and other devices, and then click Devices and Printers in the appropriate settings section (located on the right) to identify the USB device to which you want to connect the PS3 controller.

4

After selecting the USB dongle to be used as a dedicated PS3 Bluetooth dongle from the drop-down menu, click "Replace Driver". Important Note: It is recommended that you get a dedicated USB dongle for your PS3 controller as changing the Bluetooth dongle controller will reconfigure it to only work with your PS3 controller and cannot be used for any other operation. Technically, you can re-download the original driver, but switching from one driver to another will be a huge pain and people hate the hassle.

5

Check if the SCP monitor has detected the host address. If you are registering your controller then it looks a bit like the one below me; otherwise there is nothing.

6

Unplug the controller from the cable, you need to connect the PS3 controller to Windows 10 PC via Bluetooth. Note: Sometimes it won't be detected the first time you try so just plug it back in and unplug it again, the controller should be detected after a few seconds. If Pad 1 shows BTH instead of USB, you can tell if it is working properly

PS4 controller. 4b (Bluetooth): If you want to play via Bluetooth wirelessly, please check to install the Bluetooth driver and then select the Bluetooth device you want to use as a dedicated dongle for PS3 / DualShock 3 PC from the drop-down menu (again, assume you want to use it via Bluetooth (your PS3 controller). Important Note: It is recommended that you get a dedicated USB dongle for your PS3 controller as changing the Bluetooth dongle controller will reconfigure it to only work with your PS3 controller and not it can be used for no other operation.Technically, you can re-download the original driver, but switching from one driver to another will be a big pain and people hate the hassle

5

Confirm the computer you will be using and click Install. Please note that pop-up windows and audio messages may appear after installation.

6

After installation, open the SCP monitor to confirm the changes. If it looks similar to the image below then everything is fine and you should be able to use a wired or wireless DualShock 3 controller.

4

For Windows 10: To see if it really works, open Bluetooth and other device settings again, and then click Devices and Printers in the corresponding settings section. For Windows 7: Open the control panel from the start menu, and then turn on the device and the printer. You will notice that your PS3 controller is replaced by the Windows Xbox 360 controller; that’s okay, because the driver we downloaded above will trick Windows into treating the PS3 controller as an Xbox 360 controller. Right-click it, click Game Controller Settings, and click Properties. If the button you press is reflected in the "Properties" window in real time, then you are done.

If this reflects the button you pressed on the controller, congratulations! Now you can use your PS3 controller to play games that are natively compatible with the console controller!

5

You may also have heard of MotioninJoy, a third-party software that allows you to connect a PS3 controller to a PC. Although this was a goto method in the past, the interface has changed since then and is now flooded with spam (and possibly viruses!). Even the download page will redirect you to the ad. Therefore, we strongly recommend that you avoid using MotioninJoy at all costs and that you stick to the 2 methods above.

Whether you like to use a game console controller is completely subjective. Obviously, you are not alone. There are many competitive gamers who play better on console controllers than the traditional keyboard and mouse. Either way, I hope this tutorial shows you how to use a PS3 controller on a PC. Otherwise, don't be afraid to tell us about it in the comments. Things like this can be confusing, especially if you are not used to implementing these kinds of tricks yourself. And, as MotioninJoy sees, services are constantly changing. Ask any questions, we will do our best to help you!

Previous article Flight simulator intro games hardware

Leave a comment

Comments must be approved before appearing

* Required fields