Skip to content

Thermaltake core v1

Thermaltake recently announced a new type of CPU cooler in the form of TH ARGB Sync AIO. Although the name is definitely a bite, these coolers are definitely for enthusiasts.

These will be available in two different models, a 120mm model and a 240mm model. However, the difference between the two radiators is not a difference in size. The 120mm model will contain a high static pressure fan, while the 240mm model will contain two 120mm high static pressure fans. As a fan controller, it gives users some control.

If you are looking for additional RGB lighting to add interest to your build, then a CPU cooler is a good choice. The fans and CPU pumps of these two coolers have RGB lighting, which can be controlled by the motherboard or software. These RGB lights can currently be used with all the software you expect, such as RGB Fusion, Mystic Light, Aura, Biostar RGB Sync, and Polychrome RGB. If the user uses a motherboard without a 5V RGB connector, the

Smart Fan Controller will allow the user to switch between LED mode and speed. You can also control the lighting mode with effects such as pulse, flicker, and flow, and you can even turn off the lighting when necessary.

Both fans will use high-efficiency radiators to increase heat dissipation through large cooling surfaces. The water block provided here uses a copper substrate to provide good thermal conductivity from the CPU to the heat sink. In addition, the fixed speed of the water pump is 3300 RPM to allow the maximum amount of water to circulate.

In terms of connection, these fans will use a 4-pin PWM connector, allowing fan speeds up to RPM and a maximum noise output of 28.2 dBA.

For PC enthusiasts and RGB fans, this is undoubtedly the perfect cooling solution. It is not yet clear on pricing information and when and where the cooling solution will be available. If we hear more news, we will notify you in time.

Previous article Flight simulator intro games hardware

Leave a comment

Comments must be approved before appearing

* Required fields