Skip to content

Red dead redemption 2 system requirements

Have you tried playing a game and the computer suddenly shuts down on its own? There may be many reasons behind this problem, but it is common for the computer to shut down when the CPU temperature is too high.

How to lower the CPU temperature?

After encountering a problem in the game, this question has been asked many times. The risk is too great to keep it as it is, and it may result in replacing your CPU or worse, replacing your motherboard.

In order to avoid facing such a dilemma, we have compiled a list of effective methods to reduce the CPU temperature. More on this below.

In most cases, according to current computer design, when the CPU reaches a certain temperature, the entire system will shut down to prevent it from emitting smoke. This ensures that your computer is protected from possible further damage.

In any case, regular high temperature readings when using a computer for a long time can damage and damage the CPU. There is also the risk of damaging the motherboard in the future. This is one of the reasons why you need to ensure that the CPU temperature is kept at a low level.

Check out the best CPU temperature monitoring software here.

The common reason why gamers have higher CPU temperature readings is related to the location of the computer system.

The possibility of seeing higher temperatures is likely to happen. Due to the variety of games designed, there is really no clear answer to this question. Some games may rely on the CPU, while others rely on RAM or GPU. Not to mention, "safe" temperature readings vary by CPU model.

Anyway, the CPU temperature should be around 7580 degrees Celsius when playing games. When the computer is working on a small program or in an idle state, the maximum temperature should be between 45 degrees Celsius and a little over 60 degrees Celsius.

Looking for a new CPU, check out our best CPU recommendations.

1

One of the easiest ways to lower the CPU temperature is to allow better air circulation in the computer system. Unfortunately, many people fail to do this.

There is what we call positive airflow (more air enters the system unit and less airflow), negative airflow (more air flows out instead of in), and neutral or balanced airflow. It is best to choose a neutral airflow setting, rather than a positive or negative airflow.

Unless you fully control the RPM of each fan, there are more intake fans than exhaust fans, or vice versa, you can adjust and manipulate to get the best airflow.

2

People often overlook the importance of maintaining orderly cable management. The fact that they take up a lot of space is the cause of poor airflow. Taking the time to organize the cables inside the computer is an effective way to promote better air circulation.

3

A common reason for high CPU temperature readings for gamers is related to the location of their computer system. If it is placed in a poorly ventilated place, higher temperatures may occur.

Even with neat cable management and proper airflow settings, even in idle conditions, the temperature still shows higher readings. Be sure to move the computer to a well-ventilated area before the computer runs into trouble.

4 The

fan keeps air flowing in and out of your computer system. At the same time, in the long run, they will accumulate dust on the blades, so it is important to clean them regularly.

Simple tasks like this can generally solve many temperature drops. Do this regularly to make sure the temperature is maintained.

To do this, you need the right tools and equipment to ensure that you perform the operation correctly.

What you need:

1

2

3

4

5

Note: Be sure to hold the fan, and don't let them spin when you hit the fan with compressed air. This can cause damage to the fan connector.

6

7

8

5

For years, people have been arguing that an open computer system is better than keeping it closed. This seems logical because the open enclosure allows more air but also attracts more dust. The

uses a closed computer case to ensure improved airflow and at the same time prevent dust from entering. This also promotes and ensures that you are unlikely to clean them more frequently.

6

Reapplying thermal grease is usually sufficient. In some cases, the thermal paste will remain and dry out. This represents a threat to your CPU. Choosing a better quality thermal paste can achieve better heat transfer between the heat sink and the CPU.

When applying thermal grease to the CPU, be sure to check our guide on how to properly apply thermal grease to the CPU for proper use, and then check the ideal temperature reading.

7

Ordinary fans or heat sinks may be fine, but they are not as effective as after-sales CPU fans or heat sinks. You should first choose and consider buying an aftermarket CPU cooler, especially if you are overclocking your CPU.

This should also reflect the huge difference in CPU temperature. Check out and view our review of the best gaming CPU coolers to make the right investment.

8

If your computer has 2 chassis fans installed, you will definitely see an improvement in temperature readings

Your request.

10

Manually adjust the CPU fan speed, it is a simple and easy way to adjust the temperature and read the client.

1

2

3

Note 50% should have cold temperatures with idle processes and speeds. Adjust the temperature when playing the game to maintain the low temperature.

11

During the easiest way to reduce the temperature of its CPU, it is to reduce the maximum capacity or the load of the CPU. To do this the best is the fact that you do not need to spend anything. When you click on

1

4

3

4

5

6

5

6

5

6

+ Symbol, and then click Change the power options that are displayed. Since this occurs due to a fatal error, put a 0 in the configuration. You must stay at 75 percent or more. When the temperature of the CPU

9

is a continuous drop in the temperature of the CPU at the upper temperature limit of .

CPU that will be displayed within 1030 seconds, does not change this. There is a reason why the manufacturer selects the limits of the CPU. If the CPU exceeds this temperature, it can have a dangerous impact.

must confirm that it is hitting the amount established by the manufacturer. In general, when the temperature limit is reached, this can stop the CPU to avoid overheating.

It reaches its maximum temperature, and the CPUs that reach the overcoming of this have a significant impact, which can probably cause persistent damage to the CPU.

Alternatively, you can fly over the CPU, but do not attempt to adjust the temperature limit. The CPU is not intended to work for maximum temperature levels. This will become unstable when this happens. This can cause irreversible damage to construction.

The dangerous temperature of the CPU varies slightly depending on the type of CPU it has. All will change the temperature limit. However, one more than 80 degrees is very dangerous for CPUs.

100 degrees is at the boiling point, and thinks about this, you will want the temperature of the CPU to be considerably lower than this. As the temperature is low, the PC and its components will be executed in general.

Temperature of your CPU, may vary depending on whether or not they have been used. For example, an inactive PC must be executed in the generally about 35 degrees. When an inactive PC reaches 50 degrees, this is a serious problem. If the PC

works at full capacity, you should sit at approximately 60 degrees. More of this is dangerous.

Keep your CPU temperature on a low level is a happy computer. The improvement of performance and improvement of the response rate is one of the appropriate computers.

By following these methods, it will be delivered to the experience and will achieve lower CPU temperatures.

Previous article Flight simulator intro games hardware

Leave a comment

Comments must be approved before appearing

* Required fields