Skip to content

Overclock monitor

RAM overclocking can be a bit overwhelming at times, especially when you know that it provides relatively low results. Sometimes it is better to leave things alone. However, if you have seen the latest DDR5 RAM module to be released and now feel that your memory is lacking in terms of speed, don't worry, in the next article we will take you by the hand and show you what it is. What you need to overclock your memory. Overclocking

RAM is not easy to achieve, it mainly depends on many different variables such as motherboard, system, and RAM modules. While adjusting the RAM speed may not bring extra FPS to your game, it can bring smoother file operations and aid video editing / multitasking.

There is a problem during overclocking. Don't worry, you can restart it at any time. If your PC starts and is usable but unstable, you can go back to the BIOS and change the voltage or time back to the original state. If your PC encounters problems when restarting and the restart does not work, you can clear the CMOS on the motherboard at any time. If you have not done this before, you may need to refer to the MOBO manual, but it will reset your BIOS to factory settings, which means you can start over.

Use memory, you can get some overclocking options, 1. Automatic, 2. XMP and 3. Manual. In this guide, we will show you how to use these options, but mainly a step-by-step guide to manual overclocking using XMP.

If the result is stable, success! The

still has to be beautiful, but in most cases, overclocking RAM is more important than tuning and the more expensive GPU or CPU is less intimidating. Even if it is overclocked, RAM does not generate so much heat, so the risk of large-scale heat dissipation problems is reduced.

Even if you accidentally push the voltage on your RAM too far, it will be detected in your motherboard's system test. At that point, you can simply go back to the drawing board, lower the voltage a bit, and try again. As long as you don't directly use the crazy high voltage, the chance of burning RAM is minimal.

As with any overclocking that requires a voltage increase, we recommend increasing it in very small increments. 0.015V is the perfect voltage for each test. This may take a bit of time, but it is the best way to ensure that your RAM remains safe throughout the entire process.

As you must have heard at some point, overclocking shortens the overall life of components, and RAM is no exception. However, before you witness the negative effects of overclocking, you are most likely ready to upgrade, especially if you only overclock your RAM from time to time. Continuous extreme overclocking of

will significantly shorten the life of any computer component, but again, you should expect it to last for about 3 years. The

is very similar to any other component, and there are steps you can take to minimize long-term damage to RAM caused by overclocking, for example high-quality airflow in your case or even custom loops.

MHz more RAM is always better. You may not see the difference in the real world in the slight increase in RAM in the game, maybe only a 12% increase in frame rate, but it can help improve the efficiency of general-purpose computing in all areas.

Faster RAM makes your processor really work, not by direct throttle, but by improving the efficiency of the dialogue between the CPU and other aspects of the build. In the end, your computer will behave like a well-functioning machine, with super-fast startup and load times, and raw file operations.

Although you won't see a significant fps increase with faster RAM, you might be surprised by the way certain games react. Some people are more sensitive to increased memory speed than others.

XMP is a completely safe RAM overclocking method, because the frequency boost has been tested at the factory and in the QA process. XMP only offers options that are known to be completely stable, so don't be shy; test it!

If you've paid for more expensive memory modules and have never fully utilized their potential, that would be a complete shame. In other words, before you start testing some XMP tweaks, you need to assess whether it is worth it.

If your RAM is already running at full motherboard capacity, increasing the clock speed will have no effect on performance. Your motherboard can't take advantage of speeding at all.

The last reason to be careful is that if the maximum XMP voltage rise of your RAM exceeds the CPU limit, it may cause some problems, so it is best to check if your CPU can support the XMP profile. We won't worry too much, even if you accidentally exceed this threshold, if the voltage lasts for a long time, it will only have a negative impact on your CPU.

Previous article Flight simulator intro games hardware

Leave a comment

Comments must be approved before appearing

* Required fields