Skip to content

Low supply of amd ryzen 3900x

Worried that the GPU temperature will exceed 70 ° C and slightly above 80 ° C when gaming?

Glad you are concerned about the health of the graphics card. But you might be surprised that some graphics cards are designed to exceed these temperatures! Yes, some GPUs can safely exceed 90 ° C without any consequence (although it may shorten the lifespan of some cards).

In any case, there are ways to keep the temperature around 50 ° C and 60 ° C during gaming, up to 70 ° C. Read the following method we compiled to achieve a lower GPU temperature.

You can find so many graphics cards today, and all graphics cards are specially designed to work safely at different temperatures.

takes the GTX 1050 as an example: its safe gaming temperature reading is between 60 ° C and 70 ° C, while the GTX 750 ti's safe gaming temperature reading is between 55 ° C and 65 ° C. In any case, any temperature above 80 ° C clearly indicates that steps must be taken to restore the temperature to around 70 ° C or below.

If you are unsure of your graphics card's safe gaming temperature, check with your GPU manufacturer.

Plus: Best Graphics Card

If you're not sure how to check the GPU temperature, third-party software should be able to help. For your convenience, the following is our recommended software for reading the CPU and GPU temperature.

Choose what you want and install it. If you find that the GPU temperature is higher than the safe reading, please take some time to read the following methods to lower the GPU temperature.


There are several conditions that can cause the thermal grease on the graphics card to dry out. Simply replacing the thermal paste can usually solve the problem.

You want to use the best thermal paste on the market right away, or at least the best thermal paste that fits your budget. Before making any choice, please understand the difference between thermal paste, pad and grease here.

If this is your first reset or replacement of GPU thermal paste, please read our guide to learn how to apply thermal paste first to get the best temperature output.


Dust spots are one of the main reasons why the fan cannot do its job effectively. Removing dust accumulated on the GPU may cause a significant increase in temperature.

To safely remove dust from the GPU, you need to:


Wipe the outside of the graphics card to remove dust.


Unscrew the graphics card with a screwdriver.


Carefully twist the cooler that comes with the graphics card until it disperses.


Do not separate the fan and the graphics card, and be careful to connect the fan and graphics card cables.


Unplug the fan and turn it upside down.


Place the fan in a well-ventilated outdoor area and use compressed air to remove dust.


Use baby wipes and screws to clean the fan blades.


Use baby wipes to clean the dust from the graphics card.


Let everything dry before mounting the card.


Reinsert the fan into the card.

11 4444 Install the rear of the fan.


Retighten all parts.


Before reconnecting it to your computer, make sure that everything is installed.


Your GPU may not get enough airflow in the chassis. This is why you need to improve the position of the fan in the case. In addition, this may be the best time to consider reducing or increasing the number of fans you currently have. Too many or too few fans in the

case will result in dead ends where air cannot flow effectively.


Before you know if you need more fans, an "out of the box" test should help you. Play a few games and let the GPU run for about 5-10 minutes. Do this with the case closed and check the GPU temperature.

Open the case and do the same to check the temperature difference. If the difference is large, consider purchasing a case with more fans to significantly improve airflow.


For chassis with fan slots, all slots must be populated and connected to fans. Leaving them blank will throw the potential of the case straight into the trash.

Get enough fans to fill empty slots to improve and improve airflow. This should solve the problem of increasing temperature readings during gameplay.

Replacing utility fans and faulty fans should also resolve the GPU temperature rise issue.


Purchasing aftermarket GPU fans also solves the problem of GPU overtemperature. Choose the right product for your GPU and see temperature readings of approximately 50 ° C to 60 ° C and up to 70 ° C while gaming.


Aftermarket fans are good to use, but if you have the extra money, why not use a water-cooled system? The

water cooling system is well suited for GPU overclocking. If you have an overclocked GPU with a universal fan or backup cooler, the temperature can be very high. If you have the means and see a temperature below 50 ° C, use this setting.


After the driver update, the GPU temperature of many gamers increased more than it decreased. The temperature may rise to at least 10 ° C after the update. This is not new. In fact, if there is a new update available, we suggest you give it some time to see how it performs.

If you updated the graphics card driver and noticed an increase in temperature, please go back

But in the long run, it will also increase the service life of the card.

Follow the correct steps to properly adjust the GPU and see the temperature drop drastically.

Keeping the GPU temperature low is the key to keeping the GPU longer. This also saves you from having to replace them in advance.

Keeping your GPU at a low temperature with such a small effort can actually greatly help maintain the health of your graphics card. There are many ways to lower the GPU temperature, and the method we discussed above is one of the most effective ways to lower the temperature.

Previous article Flight simulator intro games hardware

Leave a comment

Comments must be approved before appearing

* Required fields