Skip to content

Intel refresh cooler design comet lake processors

Planning to push your new Intel CPU to the limit? Intel recently released the details of the power consumption of the 10th generation Comet Lake processors when maxed out. Peak boost clock speed is great for anyone wanting all the performance available, but power usage should always be considered. The power consumption of the maximum clock speed

is not clear so far. Since Intel has released a full specification, this new information leaves some people feeling a bit frustrated, because they have only heard of it now.

According to the German technology website ComputerBase, the full specifications of the Comet Lake chip have already been published. Now we can see the power consumed by the CPU when it reaches its maximum acceleration speed.

Before we continue with standardization, the standard clock speed is called PL1, also known as power level 1, and the boost clock speed is called PL2 power consumption. Intel's flagship Core i910900K

processor has a 125W PL1, but a 250W PL2, a big difference to consider. This was tested by Der8uer, who tested a 30-core 1910900K CPU and found the PL2 score to be between 232W and 278W.

Similarly, the PL1 of the Core i710700K is 125 W, but the PL2 is 229 W, and the PL1 of the Core i510600K is the same, but the PL2 is 182 W.

For those familiar with the 9th generation of chips, it should come as no surprise that the boost speed requires almost twice as much power. The PL1 of the Core i99900K is 95 W and the maximum lift speed is between 160 W and 180 W.

Another revelation is the Tau value of the new 10th generation chip. The Tau value refers to the period of time that the processor can run at peak performance before returning to PL1 inventory speed.

Interestingly, Core i910900K, Core i710700K and Core i510600K have the same Tau value, which is 56 seconds.

Whenever we talk about clock speed and power consumption, it is important to remember that the motherboard you choose also has a huge impact on the CPU.

This is because motherboard manufacturers can configure their own Tau and PL2 settings according to the functions of the corresponding motherboard. Ultimately, this can affect the maximum speed your system can produce, so it's always worth doing your research before buying a new CPU or motherboard.

What do you think of the new Intel specs? Are you going to push these CPUs to the limit or is there a problem with your motherboard? Please tell us your thoughts below.

Previous article Flight simulator intro games hardware

Leave a comment

Comments must be approved before appearing

* Required fields