Skip to content

Intel 6 core comet lake

Mechanical switches have been around for a long time and give gamers faster start-up time, longer lifespan, and more tactile response that other keyboard switch technologies simply can't replicate, no matter how hard they work.

Over the years, mechanical switches have continued to evolve and key switch manufacturers like Cherry now offer a host of alternatives to choose from, all of which offer slightly different features and benefits.

Although Cherry has a host of key switches (custom made for gamers and typists) to choose from, today we are going to look at its two most popular, Cherry MX Red and Cherry MX Brown. These two types of switches are specially designed for gamers and provide the highest level of speed and motive force.

In the next article, we will look at the fundamental difference between these two switches, followed by a full overview of the most suitable sets. Chapter

In this case, don't waste any more time, get straight to the point!

There is a mechanism called a switch under each key. This switch is used to record each keystroke and send relevant information to your computer. Over the years, keyboards have used a large number of key switch technologies, and most of them have customized their characteristics according to custom usage scenarios. Today, the

key switch has a variety of responses, noise, handling speed, travel time, and tactile feel, giving consumers nearly endless possibilities when choosing the next board.

But keep in mind that not all keyboard switches are mechanical. Over the past few decades, keyboard manufacturers have started using cheaper, less efficient, and quieter alternatives to rubber membrane dome switches.

In comparison to mechanical alternatives, membrane keyboards are very different. They are composed of three layers of flexible material, with a conductive trace at the bottom, which is used to engrave each button. The rubber dome is located under the button and compresses when force is applied. Then move the second layer, thus activating the final conductive trace at the bottom. Alternatively, a mechanical switch uses a spring mechanism, which snaps the key back to its original position once the key is pressed. The key switch itself has a rod at the bottom that contacts the circuit at the bottom of the circuit board, and finally records your keystrokes to your PC.

The following shows some notable differences that separate membrane switches from mechanical switches.

So now that we have a better understanding of what a mechanical switch is (and what it does), let's start looking at some of the main differences we found when comparing Cherry MX Red and Brown switches.

Before we get into the more confusing key switch terminology, we have made a simple table showing the main difference between the two mechanical switches:

Cherry introduced the very popular Cherry MX Red switch in 2008 , A gauge that requires very little actuation pressure to provide a linear feel for the keys. As can be seen from the table above, the Cherry MX Red switches require much less driving force than the Brown alternative, which means they provide a smoother transition when pressing the keys. This makes the Cherry MX Red switch responsive and extremely smooth to the touch. Due to its slight driving pressure, the Cherry MX Red switch is very suitable for typists. They will not fatigue your fingers, and they will provide excellent speed. The only problem with using linear key switches when playing games is that users are more likely to press the wrong keys. For many players, it is not important to stop clicking here and there. However, for competitive people, this can be the deciding factor when choosing a keyboard.

In terms of sound, Cherry MX Reds does not have an imaginary silence. However, because they provide linear characteristics and low transmission pressure, they are definitely considered quieter than the Browns. The

Cherry Mx Brown switch replaced the reds for almost 15 years and was introduced to the keyboard as early as 1994. Like Cherry's Red switch, Brown is a non-click switch that provides a travel distance of approximately 2.0 mm. However, this is almost the end of the similarities-these switches are different in most other areas.

Cherry MX Browns has the sense of touch and hearing, provides smoother performance, and is more suitable for speed and response time. The tactile characteristics of the Cherry MX Brown switch make the experience more enjoyable for both gamers and typists. It also allows gamers to better indicate when a key is pressed, which is an area where the linear switch is insufficient. The

Cherry MX Brown switches have a slightly higher actuation pressure and are more accurate than the MX Red counterparts.

In terms of sound, the Cherry MX Browns are almost the same as the previous reds. They are all non-click switches, but they do provide a certain amount of audio during use.

To give you a better understanding of the features offered by other switches in the Cherry MX class, here is a brief overview of each switch. If you're still not sure which switch is right for you, perhaps the following will help you make that decision.

Clicky, tactile and extremely resistant. These switches provide 80cN operating force, 2.2mm pre-stroke, and are equipped with a really obvious click.

These non-click switches provide good accuracy and low operating force (65cN). Combine low pre-travel with tactile switching characteristics and above-average driving force for a highly enjoyable typing experience.

For lack of better terminology, these are click-free alternatives to Cherry MX Greens. They provide the same operating force (80cN), similar travel distances, and the same pleasant touch-switching characteristics that everyone loves. Chapter

Red goes one step further by reducing each stroke by 0.1mm. The

Cherry MX Speed Silver switches are almost exactly what they say, providing a quick start for the most competitive gamers. In addition to the smaller pre-trip distance between Cherry MX switches, these linear switches provide click-free drive.

Last but not least, the perfect keyboard switch for a quiet office: Cherry MX Blues. Jokes aside, these are one of the few click switches made by Cherry. They provide pleasant hearing performance and require 60cN of operating force. With a 2.2mm pre-travel and above-average operating force, they are an excellent switch for typists.

This is our comprehensive guide to the differences between red and brown Cherry MX switches. We hope that this guide will not only make your next purchase decision easier, but also give you the knowledge to go out and buy a keyboard that suits your specific requirements.

What mechanical switch do you currently use? Leave us a message in the next section and let us know. Even better, you can now go to our community center, where you can discuss all peripherals with like-minded people.

Previous article Flight simulator intro games hardware

Leave a comment

Comments must be approved before appearing

* Required fields