Skip to content

Hp offering big savings top gaming monitors

Whether you're a beginner or a PC building expert, cable management is important. Cable management takes some extra effort and sometimes a little planning, but it's always worth it in the end.

Organizing cables in the computer can not only improve aesthetics, but also improve airflow and make the machine easier to clean. This is a guide to help you untie these cables, relax, and create some kind of cable management art.

cable management for your PC has a few benefits, the most amazing being how it makes your build look and feel. When you take a little time to route the cables, the aesthetics will be greatly improved, which is very beneficial for anyone with transparent plastic windows or tempered glass panels.

Organizing cables can also allow more space inside the machine, greatly improving the airflow of the system. The tangling of cables going through the motherboard to the power supply will greatly reduce airflow and may cause heating problems for valuable components. In turn, PC overheating will shorten the life of the build and require more frequent maintenance. If parts are damaged or need to be upgraded,

cable management also makes it easier to replace parts because you don’t have to pass through a large bundle of cables by hand to disconnect the hard drive. A clean system can simplify future tasks and make your life easier in the long run. In addition, you will find the machine easier to clean. No matter how clean you are, dust will accumulate on your PC and poor cable management will only make cleaning your PC difficult.

has a few components to help you with cable management when building a PC. The correct components can cut down on a lot of extra work and won't leave you confused when building the system.

You will be pleased to know that cable management has been considered by a large number of chassis manufacturers. PC cases with good cable management options sometimes depend on your budget. It is worth noting that some cheap cases do not have holes in the back panel, while their cables do not. Others may have only a few holes so you can pull the cables out from behind and hide them, while some have holes with rubber caps to increase visual appeal. Some cases also have cable holders that are part of metal products, allowing you to use zip ties to secure the cables.

When choosing a power supply for your build and considering cable management, it is best to choose a modular power supply. Be careful with non-modular power supplies because they are cheaper, but it is almost impossible to hide the cables depending on the situation. The modular power supply allows you to connect only the cables you need, freeing up some space when wiring. Most power supplies are modular and there are several options to choose from, but sometimes they offer a higher price for this feature. For money-saving PC builders, a good middle ground may be the semi-modular option, which, as the name suggests, only connects a few "critical" cables, and there are a few additional cables that can be plugged in. Compared to the motherboard, the size of the

motherboard is worth considering as it will greatly affect your ability to easily manage cables. For example, if you install an ATX motherboard in a mid-tower or small case, you can almost completely cover the cable hole, and the number of cables displayed will exceed your expectations. At the other end of the scale, you can install a microATX board in a huge computer case, and you will handle more cables in the system. So please consider the size difference and plan around it!

You should consider using some tools to help you find a cleaner structure. Obviously a screwdriver is needed, but there are some other parts that won't cost you too much, but will make your life easier. If there are some cable holders, the

cable tie will help you fix the cables to the metal box. Cable ties are also usually used to organize a bunch of cables, so if you want to hide them under the unit, tie them first.

Cable tie base and cable tie work together. The base has an adhesive side, allowing you to install it where you need it. The top of the base usually has a four-sided hole that allows you to pass the cable tie and secure the cable to the base.

There are some cable cutters that are convenient because they are generally the best tool for this job and it is easier to cut excess cable ties. Don't worry, although the scissors will do a good job and will not hinder the aesthetics of the cable management, pay attention to the sharp corners.

If you are considering cable management for an already built system, it is best to start over. Remove the components and unplug all plugs, then clean the housing and start thinking about cable management again. This seems to be a longer method, but in the long run, it will be easier and produce better results.

Most components can install the PC into a predetermined slot, and it will stay there, there is some room for other components, you can move a little bit to try to make cable management easier.

The bottom HDD tray can cover any excess cables that you couldn't organize in the system, and you can even install the SSD on the rear panel, which in some cases gives you different cable management options.

It's great to carefully plan ahead for buying components that can be put together well, while still giving you plenty of room to manage cables, but you can go further. When managing cables, plan in your head and run without cable ties to make sure all cables are adequate. Take your time and remember that it is a creative skill, so persist, experiment, and enjoy.

Previous article Flight simulator intro games hardware

Leave a comment

Comments must be approved before appearing

* Required fields