Skip to content

Gaming pc cases

For a gaming computer, it must be reliable, and of course it must be sufficiently cooled. Well, when we think about proper airflow solutions, RGB usually takes a backseat, but as all RGB-equipped products and tempered glass get cheaper, it's easy to understand why RGB chassis fans are more popular than never.

Airflow and maximum noise levels are critical to any gamer's PC build, but there are a variety of RGB fans to choose from, so we need to make the right choice for the 2021 build.

In This Article We've rounded up the best RGB fans currently available in 2021, some of which provide great maximum noise levels and great lighting options without much of an impact on airflow. We'll break down the things you need to consider before you buy and choose a fan to suit your 120mm, 140mm, and 200mm needs.

Let's get started.

Buy from Amazon

Buy from Amazon

Buy from Amazon

Thermaltake Riing fans are some of the best RGB fans you can buy. These can be controlled with a smartphone, used with Amazon Alexa, and are very dynamic. The

Riing Trio is the perfect way to make your next job shine. Thermaltake knows its cooling methods and these fans provide them in the most beautiful way. In addition to the fancy features mentioned above, these are actually less than most cables and have a maximum noise of 25 dBa.

Buy Amazon

The Corsairs LL series RGB fans are one of the best fans on the market, with vibrant RGB and excellent airflow. The Corsair LL Series RGB

Fan is one of the best fans you can buy. The excellent design and high-end performance make it very suitable for its tempered glass case. They are available in a variety of sizes and can be purchased as a single fan option if you can afford them.

Buy from Amazon

For the best 200mm RGB fan, Thermaltake Riing Plus 20 provides unrealistic airflow without making too much noise. Oh, and there are enough LEDs to illuminate the room. It’s not surprising that

saw Thermaltake on this list twice, because their Riing fan is one of the best RGB options available. Riing Plus 20 is the best 200mm RGB fan on the market. In addition to its impressive appearance, it also has 118 CfM and quiet operation.

Buy Amazon

NZXT Aer fans are perfect for airflow, and these RGB versions will make any situation look great.

NZXT produces high-quality cases, fans and coolers, so they are no strangers to making reliable products. The Aer RGB 2 fan adopts a unique square design, which works extremely well when used with the brand's HUE lighting kit.

Buy Amazon

The upHere RGB Fan Kit brings you five fans at a very affordable price! They look great and are perfect for budget conscious builders.

Do you want to improve the appearance of your building without spending a lot of money? Well, the upHere RGB fan kit can provide you with five fans at a price equivalent to one of the higher quality fan options mentioned above. Just make sure you have a fan controller or enough fan headers to accommodate that many RGB fans!

Buying an Amazon

to get the best PC case is great, but if there's not enough airflow, your components may struggle and you may start to see thermal throttling.

Regardless of the hardware, choosing the right product for your needs is usually difficult; after all, it requires research, and if you are not tech-savvy, this in turn may be a minefield.

Don't worry, WePC has already done it for you, bringing you the best RGB case fans and putting them all in one place.

At WePC, we like to get in touch with the products we recommend, which is an important part of our review process.

To ensure that a product is truly "best", it must at least meet our expectations, beat the competition in our tests, and ultimately be worth the investment.

Most of the products we recommend at WePC have undergone a rigorous testing process, covering everything from price and performance to quality, efficiency and structural aesthetics.

Doing so allows us to provide you with the most accurate product performance evaluation and ultimately determine whether it is worth your consideration.

Before you buy those flashing RGB fans, there are a few things to consider. The last thing you want to do is open a new product's packaging, only to find that it is incompatible, inappropriate, or of poor quality.

As mentioned above, airflow is very important to any system. Before buying a fan set, we need to understand some terminology. Let's take a look at the different types of fans. When airflow is unobstructed, the

Airflow Fan is in top condition. Due to the more efficient natural flow, chassis with a lot of open space will benefit from AF fans. These types of fans also tend to pump air at higher CfM (cubic feet per minute). The

static pressure fan distributes air more evenly than the AF fan. They may not be able to pump as much air as possible, but they are great when blocking clogs like CPU thermal timing or cooler radiators.

The location of the fans is more important than some think, especially for the inexperienced. A popular way to set up fans is to use positive air pressure. Setting them this way will limit where dust gets into the system, making it easier to clean and maintain your PC.

Restricting dust, or at least controlling where dust enters the system, can only help keep components healthy, but there are many examples of negative pressure that can

A benefit. With the help of negative pressure, your setting will be able to push out hot and stagnant air more effectively, thus enhancing the cooling effect.

Whichever method you decide to use, keep in mind that it depends on your preference, although I recommend using positive air pressure for users with a lot of voids in the case, or if your intake fan is located where there is a dust filter.

Noisy fans are a thing of the past and many fans provide a good maximum noise level. The fans on this list are not particularly loud and some fans have a maximum noise level of only 25 dBA.

Generally, the fan noise level ranges from 10 dBA to 36 dBA. Some gamers want to keep these levels as low as possible, so the following is the ratio of loudness compared to other noises:

RGB case fans are available in several sizes, so it’s important to understand the sizes supported by your case . The RGB fans in this list are 120 mm, 140 mm, and 200 mm. Many cases are compatible with fans of all sizes, but some cases may be limited, so be sure to check before buying.

size mixing is not a problem; for example, you can install two 140 mm fans at the front and a 120 mm fan at the rear to achieve a positive pressure setting. It is worth noting that you can quickly check the direction of pressure by adding the CFM of each intake and exhaust fan.

Many of these RGB fans have controllers that allow you to run multiple fans in a unit, which usually makes things easier and cleaner. Some RGB fans may not have such decorations, so it is very important to find RGB connectors on the motherboard. The

has two types of RGB connectors, the 5v 3-pin RGB connector for addressable RGB LED devices and the 12v 4-pin for non-addressable devices. Please note that you cannot connect the device to the wrong connector because it may damage your RGB fan or lighting. Regarding the power to the fans, the

will have a connector that can be connected to the motherboard or to the fan controller header.

has three types of connectors:

Although we are working on RGB fans, the main function is not just to "look beautiful", we also need to make sure there is enough air flow. You may be looking for a fan for a new all-in-one cooler, so you need some static pressure fans to push air through the radiator.

You may have a system that is primarily a brand, and all links use their software to unify the lighting between their chassis, components, and peripherals. So if aesthetics are important, you may want to match your current RGB setup with similar fans.

Maximum Noise Level (dBa)

25.2 dBA

Maximum Rotational Speed (RPM):

1500 RPM

CFM Airflow (120mm):

41.13 CFM

Connector Type:

Class 4 USB 4 4 Maximum 4 x 4 x 4 x

Needle 4 x No. 4 connector)

24.8 dBA

Maximum Rotational Speed (RPM):

1500 RPM

CFM Airflow (120mm):

43.25 CFM

Type of connector:

2 x 4 pins

dBA 4 Maximum 4 decibels 4 4 Decibel 4 Amazon 4 Max 4 decibels 4 4 Decibel 4 4 Decibel Max 2 Speed (RPM):

1000 RPM

CFM Airflow:

117.96 CFM

Connector type:

1 x 9-pin USB connector

Amazon

Maximum noise level (dBa)

33 4 4 4 4 to 4 to 40 40 40 40 40 to 45 to 45 CFM airflow (120 mm):

52.44 CFM

Connector Type:

4-Pin

Buy on Amazon

Maximum Noise Level (dBa)

17.6 dBA

Maximum Rotational Speed (RPM):

RPM 1444 Connector Type: C

RPM

4440

3-pin 4-pin

Compr e Amazon

Maximum Noise Level (dBa)

25.2 dBA

Maximum Rotational Speed (RPM):

1500 RPM

Airflo w CFM (120mm):

41.13 CFM

Connector Type:

1 x 9-Pin USB Header

Buy Amazon

PROS

can be controlled with a smartphone

can be used with Amazon Alexa

Synchronize with Razer Chroma

Synchronize with Razer Chroma "4RGB 44Qusads" 44 RGB cable Compared to other brands

Disadvantages

Expensive

Only three packs of

Thermaltake Riing The RGB fan is arguably the best on the list, and to a degree it is. These fans provide good levels of airflow while also providing the best RGB lighting I've seen on fans before. The strong lighting comes not from two, not three, but four RGB cycles! If the extra RGB loop isn't enough, Thermaltake has made these fans a breeze to use by plugging in a 9-pin USB connector. Although the Corsair LL series is excellent, each fan has two connectors to power the fan and the RGB, which can get a bit confusing.

These fans have some cool features around Thermaltake's so-called "RGB PLUS Ecosystem". In fact, you can sync these fans with your phone. When you say "Hi TT", you can control the light mode, brightness, fan speed, and even turn them off completely by one command. You can even set these fans to reflect the current weather conditions in your area by syncing them with Amazon Alexa!

Although these fans have hydraulic bearings to reduce friction like the Corsair LL series, TT fans provide an equally low maximum noise, just 25 dBA. These

fans are only three in a pack so you have to pay the highest price for them, but with a plethora of features and some of the best RGB lights we've seen in fans, they are well worth it.

Maximum Noise Level (dBa)

24.8 dBA

Maximum Rotational Speed (RPM):

1500 RPM

CFM Airflow (120mm):

43.25 CFM

Connector Type:

4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 444 444 4 44 Connector Connector type despite high speed

Excellent design

Easy to install

Disadvantages

The

airflow is relatively quiet considering the size of the

can be purchased with or without a

fan controller beautiful

disadvantages

expensive

These Thermaltake 200mm fans are huge and unsurprisingly can pump a lot of air to your system. The TT Riing Plus 20 fan is very suitable for the front of the case, with a CFM of 117. This may not be the quietest fan, but the maximum noise is less than 30 dBA, it is hardly noisy and you can benefit from the Thermaltake airflow and fantastic RGB lighting.

This fan is a bit flexible, because Thermaltake can optionally include a fan controller, in case you don't already have it. Because its hydraulic bearings are self-lubricating and actually increase thermal efficiency, friction is reduced.

This software is very easy to use in TT, gives you countless options to fix in the RGB department, and even reminds you of any problems with fan operation. Overall, this powerful fan is the top drawer, giving you all the airflow you could want, while also lighting up your system - a heavy duty 200mm option!

Maximum Noise Level (dBa)

33 dBA

Maximum Rotational Speed (RPM):

1500 RPM

CFM Airflow (120mm):

52.44 CFM

Connector Type:

4 4 4 4 4 4 4 4 4 4 4 4 4 4 pins 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 types of connectors

Disadvantages

Expensive

Needs software for Illuminate

NZXT is famous for its housings, and they are no strangers to fans or RGB lighting. These Aer fans provide the highest CFM on the list and excellently pump air into your system while lighting it up at the same time. The reason for the impressive CFM is that each Aer fan has a small wing blade for optimal airflow. These fans run on hydrodynamic bearings for near-silent operation. Although

has only one RGB loop, which is a bit disappointing, its unique square edge design gives it some great styling points. Lighting for these fans is only effective if you have a controller or NZXT "i" case, which is not the best option for those who want to add a single fan to the case. Using the HUE 2 lighting controller, you can connect up to five fans and sync the effects for the ultimate RGB light show. The

is like the Corsairs LL series, you can buy them as separate fans, dual packs and three packs, only the single pack does not include the HUE 2 controller. NZXT is also 140mm in size, but it is only available as a single pack or two pieces.

You can be sure that the high-quality products and value for money of these fans manufactured by NZXT make Aer a good choice.

Maximum Noise Level (dBa)

17.6 dBA

Maximum Rotational Speed (RPM):

1100 RPM

CFM Airflow (120mm):

Connector Type:

3-pin 4-pin

PROS 44 44 44 44 44 44 Buy 44 44 44 44 44 Remote control

package contains 5 fans

Disadvantages

is not the best quality

is not as vibrant as other

unknown CfM

above Here the RGB fan set is our budget option in the list because this set of five fans provides a lot of aesthetic value to beautify your PC.

These are pretty basic fans and their build quality is inferior to our top pick, but that doesn't mean they have nothing to offer. These 120m fans produce a meager 17.6 DbA, which is very reasonable, and their high airflow nature can cool your system well.

These are some basic things, so don't expect any software here, but they include a remote control to change your colors and effects to match the rest of your system.

Use hydraulic bearings and rubber pads to suppress noise, making these RGB fans a very attractive option for those looking for high-capacity cooling on a budget.

Yes, of course you can connect the RGB fan to the motherboard! The only problem is that you have to make sure that the motherboard is RGB compatible. The good news is that once you are sure that the motherboard you have (or want to buy) has the ability to support RGB, you can choose from a variety of RGB fans, including 3- and 4-pin ones. Also, whether you are using a 3-pin RGB fan, a 4-pin RGB fan, or a connectorless RGB fan, you need to take a few different safety precautions to make sure you can safely install the RGB fan on the board. base. , (Otherwise it may cause damage), including: The

RGB connector is used to help connect the RGB fan to PC components such as the motherboard. Generally speaking, most RGB fans only need a 3- or 4-pin connector to function and to connect to the rest of the system. However, there are some RGB fans on the market that are not equipped with these types of connectors, which means that the only way they can be connected to the motherboard is through the RGB connector, which is built into the design of the motherboard. Therefore, if your current motherboard does not have RGB connectors, the easiest way to solve this problem is to buy an RGB fan with its own connector. One of the main reasons

Corsair RGB fans are priced so high is primarily because they are considered premium brands. If you are a master of the game or

filling). For this reason, it is important to provide cooling so that you don't overheat, which begs the question: Are 140mm fans better than 120mm fans?

Generally speaking, a 120mm fan cage is a standard option, which is sufficient to handle heavy workloads and runs fairly quietly. However, at the hardware level, 140 mm fans can provide a little extra power, which means they can push air through the system more effectively while providing a quiet workflow.

There is also a lot of debate about whether three 120mm fans are better than two 140mm fans, so if you are currently experiencing this situation, please keep the following points in mind. If you are going to use three 120mm fans, you can expect the fans to provide a lot of air thrust, although this will come at the cost of high power consumption and operating noise. In contrast, two 140 mm fans can push air better than 120 mm fans and provide quieter performance. However, the difference between the two can produce very subtle differences overall, so it is important to consider the cost and determine which one will provide you with the best value. The volume of the

RGB fan largely depends on its size and its manufacturing process. The RGB part of the fan has no effect on the decibel level of the fan because it is just a lighting system. A noisy fan is a noisy fan, whether it is turned on or not. Most RGB fans tend to run at quiet levels, although they tend to get louder when they have to handle heavier workloads.

When purchasing a new RGB fan, it is very important to consider the CFM of the fan. This is because the fan airflow is specifically measured with CFM, which means cubic feet per minute. When looking for new RGB chassis fans, CFM will help you indicate how much air the fan can circulate in one minute. Generally speaking, the higher the CFM level of the RGB fan, the better the overall performance.

ARGB and RGB are essentially the same and designed for the same purpose. The only difference is that ARGB is a slightly more advanced version of the two. RGB LED technology has developed significantly in recent years, which has witnessed the introduction of ARGB. Unlike RGB technology that can only be one color at a time, ARGB can be one color different. This means that the ARGB fan provides more custom functions, which can make your motherboard more colorful and cool, while the RGB fan can only be one color.

If you are currently trying to determine if your motherboard supports RGB, don't panic! The process is really very simple. To do this, consult the manual that came with your motherboard at the time of purchase. Next, find the RGB section and determine what type of connector your motherboard has. This will help you determine if your motherboard is RGB compatible. The

RGB fan does not draw more power than a normal chassis fan, approximately 0.11 amps. The RGB fan LED lights up with the power generated by rotating the fan, so the best way to determine how much power a particular RGB fan will consume is to look at the manufacturer's label / manual, which will give you the specific amps that your fan can consume. use while the number is running.

Whether your RGB fan requires a SATA cable depends on the type of RGB fan you have purchased. Some RGB

fans require only one cable, and RGB fans require an RGB hub, as well as RGB fans that require additional help from the controller. The easiest way to determine if your RGB (or the RGB you are considering purchasing) requires a SATA cable connection is to check the information provided by the manufacturer on their website as this will let you know which connection components are required for RGB.

For example, Corsair All RGB fans need to plug the RGB cable from the fan to the RGB hub, then plug the RGB hub to the Lighting Node Pro, and then they need to plug it into the rest of the system via SATA cable and USB. connected to the motherboard.

This is our guide to the best RGB case fans in 2020 and 2021. We hope it can help you choose the fan that suits your needs. Be sure to check out the other buyer's guides on the right side of this page, and if you want us to cover something, please leave us a message below.

Previous article Flight simulator intro games hardware

Leave a comment

Comments must be approved before appearing

* Required fields