Skip to content

Cancel twitch prime

From what I can recall, overclocking is a tool used by PC manufacturers who make deals. This is a great way to extract additional performance from hardware at no additional cost. However, if you are not familiar with creating games on PC, this can be a bit scary. Move carefully in the BIOS to adjust the clock frequency and voltage, and keep in mind that temperature used to be the only way to overclock hardware. However, this is no longer the case.

Thanks to out-of-the-box overclocking software such as Ryzen Master, the overclocking process becomes easier.

If you are looking for help on how to navigate and use Ryzen Master, you have come to the right place. We will provide you with a full description of the features that this overclocking utility should provide. However, before you begin, we recommend that you go to the AMD Ryzen Master download page and install the latest version of the software.

In the last ten years, AMD has caused great changes in the field of processing technology; PC enthusiasts have taken it seriously. That said, Intel has dominated most of the last decade because it outperformed AMD in key areas like market share and single-core CPU performance levels. Good news for Intel fans.

However, what Intel did not realize is that AMD has committed to developing a new line of CPUs, which may eliminate it in the competition for CPU dominance. That's how it is. We are talking about AMD's Ryzen 3000 series.

AMD's new processor series are specifically designed to not only match Intel processors in terms of performance and price, but also replace Intel processors. Now, as we all know, this was not the case when the Ryzen 3000 series was launched. AMD successfully reduced Intel's price, but failed to beat Intel in terms of game performance, a few frames lower than Intel in most AAA games.

But what does all this have to do with overclocking and Master Ryzen? We will talk about it soon, relax!

As you may already know, AMD designed all CPUs with unlocked compatibility in the Ryzen series. This means you can squeeze every drop of performance potential from these overclocked chips. The first image of

AMD’s impressive Ryzen 9 3950X broke the overclocking world record and appeared shortly after the release of Ryzen 3rd Gen. Of course, this caused quite a stir in other product lineups. A little extra persuasiveness.

Now, the out-of-the-box optimization of the Ryzen chip has been very good. In other words, there is still enough room to realize additional overclocking potential. This is where the Ryzen Master utility comes in.

So how does Master Ryzen make life easier? What is the difference between using software and entering the BIOS? Well, in short, life has gotten a lot easier. The

Ryzen Master Overclocking Software Utility is designed for overclocking Ryzen processors on AM4 infrastructure. Including all Ryzen processors, accelerated processing units and HEDT Ryzen Threadripper processors.

AMD's Ryzen Master provides users with advanced real-time control of their system performance. The software allows users to adjust everything from a single core to the memory voltage, and almost everything in between. The

Ryzen Master is only available for AM4-based Ryzen processors, which are unlocked when paired with an enabled AMD chipset. This means that this software will not support anything before AM4. Unfortunately, users will no longer be able to overclock their GPUs like they did when using the AMD Wattman GPU overclocking utility.

Here are some of the main functions of Ryzen Master:

As you can see, Ryzen Master allows users to adjust all the main areas of the system. With so much versatility and freedom, users should be able to tailor their systems to their exact requirements.

So now that we've understood the basics of Ryzen Master, it's time to take a closer look at how to use this software.

We have entered the software for the first time since we installed it in this version.

If, like us, you are using Ryzen Master in your build for the first time, you will receive an AMD Ryzen Master disclaimer. It looks a bit like this:

As you can see, using this software will invalidate your warranty. If you say that you blow up the motherboard or damage the new Ryzen 9 3950X, you will not be covered.

Having said that, I won't worry too much, your team will not allow you to enter extremely inappropriate numbers that might blow up your PC.

However, you must be careful.

Just accept the disclaimer and you are ready to go.

The image above is the input interface of the latest version of AMD Ryzen Master 2.1.0. You can see that it directly displays a large amount of system data.

For the purpose of this article, we will start from the left to quickly navigate through the different tabs and menu titles, and then move to the right. The first tab is the home button, and then there are four customizable profiles, labeled "Creator Mode, Game Mode, Profile 1, Profile 2". You can use all four to create different profiles for specific scenarios; everything is very simple.

On the right side, you will see many monitoring dials, as shown below: CPU temperature, Peek core speed, PPT, TDC, EDC. Below you will see the control mode your system is currently in. Each core is designed with its own unique speed, CPU voltage control, multi-thread control, memory control, RAM voltage

Squeeze some extra MHz from your CPU. Others just want to monitor their system temperature. In summary, it is good to know that if you want to adjust RAM time or unplug the kernel, you have the ability to do so.

overclocking, for those who are completely unfamiliar with building PCs, is a way to extract extra performance from the hardware. You can increase the speed of CPU, GPU and even RAM to a higher level than running directly.

However, overclocking through BIOS can be quite difficult, and a certain level of knowledge is required before entering tasks at this level; this is where Ryzen Master comes in. On the other hand,

Ryzen Master helps simplify the whole process. It has a clear user interface that can precisely outline the key areas to make sure you know what is being adjusted. Of course, some prior knowledge is required before using this application, but it is much simpler than doing it through the BIOS.

So, having said that, let's quickly go over some overclocking basics on Ryzen Master.

We will do a slight overclocking on the AMD Ryzen 7 3800X. It has been paired with ASUS TUF X570 Gaming Plus motherboard.

Let's get started.

Start the process by selecting one of the four configuration files provided by the software. We have selected the profile from creator mode. As you can see, in the config file, you can now access all CPU cores and many "control mode" options. Set "Control Mode" to manual to start the overclocking process.

At this stage, you need to find out how far you want to take your CPU. We decided to use 4.4 GHz instead of the currently set 3.9 GHz base clock.

Once you've determined your overclocking goals, start boosting each core by 50. Once all the cores have been tuned, simply click the "Apply and Test" button at the bottom.

This will run some stress tests on your system. If you push the CPU too far, the system may crash or return to a stable number. In our example, everything went well, as you might imagine. The

3800X has an increased clock speed of up to 4.5GHz, so the 4.2GHz speed we started with is achievable.

Always check your monitor dial during the stress test. As you can see, even this small adjustment has increased the operating temperature of the CPU by almost 5 degrees.

Keep doing this until you reach the speed you want and run a stress test to make sure your system is stable. The

underwent a final stress test at the required core speed of 4.4 GHz and found similar readings again. The rise in CPU temperature is one of the most obvious differences between the two clock speeds. However, this is to be expected, and this is the number one reason we recommend that you have an inventory cooler that can handle this type of increase.

In the end, this is almost the entire content of a CPU overclocking. I recommend trying the new clock speed on something more intensive, like Cinebench R15. This will really push your CPU to the limit, if there is any instability Cinebench should find out.

Now you have it, our brief overview of AMD's Ryzen Master overclocking utility. We think this is a great device for new / mid-level PC builders who want to gain additional benefits from the hardware without struggling with a somewhat complicated BIOS.

We've just scratched the surface of what this software can do, but rest assured, it has the potential to do more.

Hope this article gives you an idea of what Ryzen Master has to offer. In the coming months, we'll show more versatility, so be sure to stay tuned!

If you want to know any information about this software, do not hesitate to leave us a message in the next section. Or better yet, head over to our community center, where you can discuss all topics with like-minded people.

Previous article Sims 4 expansion packs
Next article E3 what to expect

Leave a comment

Comments must be approved before appearing

* Required fields