Skip to content

Arctis 7 vs arctis pro

A decent pair of gaming headphones is a must in this day and age, and the company that's generating serious sound waves right now is SteelSeries, but which of their top two headphone designs is the best? We have run a direct comparison between Arctis 7 and Arctis Pro to help you make up your mind.



Frequency Range

10 - 40,000 Hz



Battery life

10 hours





Frequency range

20 - 20,000 Hz



Battery life

25 hours



The frequency response of an audio playback device is essentially the range of tone that a speaker can output before audio quality begins to suffer. Humans can receive frequencies between 20 Hz and 20,000 Hz.

Arctis Pro is equipped with the most advanced speaker drivers. These drivers use neodymium magnets to provide high resolution audio from 10 Hz to 40,000 Hz with a volume sensitivity of 102 dB. Hi-Res Audio refers to a certain threshold of audio bit depth and sample rate. In general, it increases the clarity of the audio. The

Arctis 7s has a similar but basic set of the same neodymium driver, which can push the tone between 20 and 20,000 Hz, the volume sensitivity is 98 dB, and the harmonic distortion rate is less than 3%.

You may wonder why you need headphones with speakers. The frequency of the speakers is approximately 20,000 Hz higher than the human audio frequency spectrum and 10 Hz lower than the human audio frequency spectrum. However, the absolute clarity of the headphones is not really important. The following aspects affect the overall sound quality. Because Pro headphones have such a wide frequency response, this means that tones in the audible range are not a problem at all, achieving perfect, high-fidelity reproduction and harmonic distortion levels below 1%.

Although the Pro speaker driver has been greatly improved, its microphone is roughly the same as Arctis 7. Both have a two-way noise reduction mode, with a frequency response between 100 and 10,000 Hz, and a volume sensitivity of 38 dBA. The

update to the same microphone is a bit disappointing, because it’s nice to see the overall functionality improved to ensure you get the best return on investment. That being said, SteelSeries is not so lazy because it is a "if it's not broken, don't fix it" situation. Their

microphone has greatly improved the so-called omnidirectional noise reduction design of most other companies. Noise reduction is not actually a separate function, you can use it to enhance all-round equipment. The microphone mode has built-in true noise cancellation, making SteelSeries' two-way method more effective. The

battery used in Arctis 7 is already very impressive. A single charge can provide 24 hours of continuous use. You really can't ask for more. It's not healthy to continue playing without rest. In view of this, Steel Series did not make any performance changes to the battery, but all they did was to improve the practicality. The

uses a set of Arctis Pro headsets. The batteries are completely removable, making charging easier. If they become damaged or start to fade over time, you can replace them.

In terms of control, these are very similar designs. Both have a large, easy-to-locate mute button on the left ear cup, followed by the volume knob, the main cable jack, and finally the headphone sharing jack.

The difference between these controls is the chat/hybrid dialing. On 7, this watch face is built into the right earbud along with the USB charging port and power button. The chat / mix dial in Pros is in a separate module. The

Pro's I / O matrix is slightly different than the 7's, but because the battery is removable, you won't find the USB charging port directly on the ear muffs.

The fabric used in the ear pads of these two headphones is called Airweave. It is very soft but strong and very breathable. Wearing a pair of headphones for a long time shouldn't be a problem. There is a relatively deep depression inside the earphone to prevent contact with the ear and eliminate fatigue, while the skigoggle fabric headband fits easily and is very comfortable. The solid part of the

headband is made of light steel and aluminum alloy and side plastic washers. We prefer the all-metal construction, but it doesn't seem to really affect the overall durability. The

Arctis 7's swivel joints may be a bit loose for some people, but they will not exhibit any horrible squeaks or squeaks that appear in some headphones. Pros is more suitable, but not necessarily a clumsy way. This round of

Arctis Pro is definitely a storm. With LED lace-up ear muffs and luminous microphones, Pros has reached the intersection of RGB glow and sleek glow. It's not overbearing or overly subtle, you can customize the colors and order, and you can even sync them with other Prism RGB accessories via SteelSeries software. Unfortunately, the only light on the Arctis 7 is the power button, which changes color to show battery life.

Except for the RGB adjustable option, the software of these two headphones is the same, we are happy to say that they are professionally designed. It provides instant clarity, giving you intuitive options to adjust levels, select different audio modes, and test features, so you can have everything perfect before you even start the game. One of the coolest aspects of the

Pro series of headphones is the GameDAC option. GameDAC is a digital-to-analog converter that can achieve high-resolution 96KHz 24-bit audio playback, improve overall clarity, and accurately locate audio. You can buy Pro with or without GameDAC. Except the cables are a bit short, this is a great addition to make any audiophile smile.

Previous article Flight simulator intro games hardware

Leave a comment

Comments must be approved before appearing

* Required fields